Preface ......................................................... v
PLENARY
Controlling of Grain Boundary Structure and Interface
Structure of Advanced Materials and their Joints
M. Naka ...................................................... 3
Control of Texture in Intermetallic Compounds by
Thermomechanical Processing
Y. Umakoshi, H.Y. Yasuda and T. Sakata ....................... 9
On the Liquidus Surface and Reaction Scheme of the Ternary
System Cu-Si-Ti
A. Berbecaru, M. Naka and J.C. Schuster ..................... 15
Interface Development in Joining Yttria Stabilized Zirconia
to Stainless Steel by In Situ Alloying with Ni/Ti Filler
Metals
J.E. Indacochea, J. Beres and A. Polar ...................... 19
Interfaces in Joints and Composites Composed of Hard
Materials and Metals
W. Tillmann, M. Gathen and A.M. Osmanda ..................... 25
Hard a-Si3N4/MeNx Nanocomposite Coatings with High Thermal
Stability and High Oxidation Resistance
J. Musil and P. Zeman ....................................... 31
Development of Telerobotic System for Remote Welding
Operations in Unstructured Environment
L. Wu, H.C. Li, H.M. Gao and G.J. Zhang ..................... 37
Distribution of Zn and Interfacial Microstructure of Braze-
Welding CMT Joints between Aluminium and Galvanized Steel
Sheets
J.C. Feng, P. He and H. Hackl ............................... 43
SIMULATION AND MODELLING OF ATOMIC STRUCTURE
Reverse Monte Carlo Modeling of Atomic Configuration for
Amorphous Materials
T. Fukunaga, K. Itoh, K. Mori and M. Sugiyama ............... 51
Hybrid Simulations for Desinging of Nano-Interfacial
Structures
S. Ogata and T. Kouno ....................................... 57
On the Fracture Mechanics Theory Called (MN-rp-σθ)
R. El-Sheikhy and M. Naka ................................... 63
THERMODYNAMICS, MASS TRANSPORT, DIFFUSION AND PHASE REACTIONS
Experimental Determination fo Ga Activity in Liquid Ga-Sb-Tl
Alloys by EMF Method
I. Katayama, Y. Sendai, D. Zivkovic, D. Manasijević,
Z. Zivkovic and H. Yamashita ................................ 71
Reaction Diffusion in Diffusion Couples Ni-Al Solid Solution/
Intermetallic NiAl and Ni/Intermetallic NiAl
T. Yamane, K. Katayama, Y. Minamino and H. Araki ............ 77
Effects of a Small Amount of Та on Diffusion Behavior of
Carbon in Molybdenum
Y. Hiraoka and T. Inoue ..................................... 83
PHYSICAL PROPERTIES OF ADVANCED MATERIALS
Characterization of (α+β)/β Transformation in a TC11 Titanium
Alloy
L. Geng, B. Xu, Y.T. Li, A.B. Li and G.S. Wang .............. 91
Hydrogen Permeation in V-Nb Alloys
O. Yoshinari, M. Yamada and N. Iwata ........................ 97
Transmission Electron Microscopy Observations on Cu-Mg Alloy
Systems
K.I. Nishikawa, S. Semboshi and T.J. Konno ................. 103
Designing of Interfacial Structures
Oxidation Behavior of SiC/TiAl Composite Material
K. Hashimoto, Y. Fujino and T. Kuramata .................... 109
Reaction of Sn to Nanocrystalline Surface Layer of Cu by
Near Surface Severe Plastic Deformation
Y. Minamino, Y. Koizumi, N. Tsuji, Y. Nakamizo,
T. Shibayanagi and M. Naka ................................. 115
NANOTECHNOLOGY IN MATERIALS SCIENCE
Interfacial Residual Stresses in Semiconductor Devices
Measured on the Nano-Scale by Cathodoluminescence
Piezospectroscopy
G. Pezzotti ................................................ 123
Direct Synthesis of Isolated L10-FePtCu Nanoparticles by
RF-Magnetron Sputtering
H.W. Ryu, K. Sato and Y. Hirotsu ........................... 129
ТЕМ Studies on Phase Stability in Nanometer-Sized Alloy
Particles
J.G. Lee and H. Mori ....................................... 135
Electron Dose Rate Dependence of Phase Separation Induced by
Electronic Excitation in GaSb Nanoparticles
H. Yasuda, A. Tanaka, H. Usui, H. Mori and J.G. Lee ........ 141
Temperature Dependence of Internal Stress and Crystal Growth
of Dilute Cu Alloy Films
Y. Koike, T. Inase and S. Takayama ......................... 147
COMPOSITE MATERIALS
In Situ Synthesis of Hybrid-Reinforced Titanium Matrix
Composites
D. Zhang, Z.F. Yang, W.J. Lu and D. Xu ..................... 155
Development of Multi-Phase Intermetallic Alloy Composed of
Ni3X-Type Structures
T. Takasugi and Y. Kaneno .................................. 161
Collaborative Sintering of the Amorphous Alloy and Ceramic
Powders for Nanocrystalline Composite Materials
H. Kimura, K. Hongo and M. Naka ............................ 167
Fabrication and Wettability Test of Silicon Nitrides with
Ordered Protrusions
N. Kondo, H. Hyuga, K. Yoshida and H. Kita ................. 173
Preparation of Tungsten Carbide/Stainless Steel Functionally
Graded Materials by Pulsed Current Sintering
Y. Kawakami, F. Tamai, T. Enjoji, K. Takashima and
M. Otsu .................................................... 179
Advanced CFRM Joint Device for Mover Engineering
Y. Nishi and K. Tanaka ..................................... 185
Development of Freeform Fabrication of Metals by Three
Diminsional Micro-Welding
T. Horii, M. Ishikawa, S. Kirihara, Y. Miyamoto and
N. Yamanaka ................................................ 189
Phase Change of Zr-Al-N and Nb-Al-N Films Prepared by
Magnetron Sputtering Method
Y. Makino, K. Saito, Y. Murakami and K. Asami .............. 195
ENVIRONMENTAL ADVANCED TECHNOLOGY
Rust Layers Formed on Weathering Steels by Long-Term
Atmospheric Exposure to Industrial and Coastal Environments
K. Asami and M. Kikuchi .................................... 203
Characterization and Dissolution Behavior in a Physiological
Solution of Heat-Treated СаТiO3 Thin Films with Different
Thicknesses
N. Ohtsu, K. Saito, K. Asami, T. Hanawa and H. Kimura ...... 209
Oxidation Behavior of Mo-Si-B In Situ Composites
A. Yamauchi, K. Yoshimi, Y. Murakami, K. Kurokawa and
S. Hanada .................................................. 215
Electrical Property of ТiO2 Thin Film Deposited by RF
Sputtering
K. Niizuma, T. Hayakawa and Y. Utsushikawa ................. 221
Classification of Oxidation Behavior of Disilicides
K. Kurokawa and A. Yamauchi ................................ 227
Corrosion Behavior of Pre-Treated Fe-Al Alloys in Aqueous
Acid Solutions
N. Masahashi, G. Kimura, M. Oku and S. Hanada .............. 233
Development of Large Area Plasma Reactor Using Multiple
Low-Inductance Antenna Modules for Flat Panel Display
Processing
Y. Setsuhara, K. Takenaka, A. Ebe and K. Nishisaka ......... 239
Wear Properties of DLC and Plasma Sprayed WC Structure
Coating
M. Yatsuzuka, Y. Oka, A. Tomita, N. Murata and
M. Hirota .................................................. 245
Preparation and Characterization of Hard (Ti,B)N Films by Ion
Mixing and Vapor Deposition
M. Yamashita, S. Hanaki, D. Iwasaki and H. Uchida .......... 251
BONDING AND BRAZING
Numerical Simulation of the Stress Field of Thick 7B04
Aluminum Alloy Board during Continuous Manufacture Procedure
H.Y. Fang and C.I. Fan ..................................... 259
Microstructure and Properties of Brazing Joint between YG8
Cemented Carbide and A3 Steel
J. Zhang, L.Y. Lin, J.C. Xu and X.Q. Liu ................... 265
Bonding Strength of W-Cu Joint by PECS Method
Y. Fukuzawa, S. Nagasawa and S. Takaoka .................... 271
Room Temperature Micro-Bonding of Fine Wires to Foils
Y. Takahashi, M. Maeda, T. Doki and S. Matsusaka ........... 277
Evaluation of Compound Layer Formed by Impact Welding Using
Phase Transformation Technique
H. Date and M. Naka ........................................ 283
Pulsed Electric Current Bonding of Tungsten to Copper with
Intermediate Layer
A. Nishimoto and K. Akamatsu ............................... 289
LASER WELDING AND THERMAL SPRAYING Laser-Arc Hybrid Welding
S. Katayama, Y. Naito, S. Uchiumi and M. Mizutani .......... 295
Theoretical Approaches to Erosion and Wetting Phenomena
during Laser Brazing Process
K. Saida, W.H. Song and K. Nishimoto ....................... 301
Prediction of Laser Fusion Zone Profile of Lotus-Type Porous
Metals by 3D Heat Transfer Analysis
T. Tsumura, F.X. Ye, T. Murakami, H. Nakajima and
K. Nakata .................................................. 307
Study on Improvement of Oxide Layer and Properties of Plasma
Sprayed Alumina in Thermal Barrier Coatings
A. Kobayashi, G. Shanmugavelayutham and S. Yano ............ 313
Spraying Using Electromagnetically Accelerated Plasma
H. Tahara, N. Yoshimura and Y. Koshiro ..................... 319
Adhesion Behavior of WC Coating Deposited on Titanium Alloy
by Electrospark Deposition
P. He, Y. Qian, Z.L. Chang and R.J. Wang ................... 325
Laser Cladding of Fe-Cu Based Alloys on Aluminum
K. Uenishi, Y. Ogata, S. Iwatani, A. Adachi, T. Sato and
K.F. Kobayashi ............................................. 331
Control of Microstructure by Laser Spot Heating
T. Shibayanagi, M. Tsukamoto, N. Matsuda, Y. Soga, N. Abe
and M. Naka ................................................ 337
Resistance Welding by Inserting Wires between Joint Interfaces
T. Terajima and T. Kuroda .................................. 343
Author Index .................................................. 349
Keyword Index ................................................. 351
|
